Sofirn SP32A V2.0 flashlight, an upgraded version of SP32A, with advanced temperature regulation (ATR) technology and power indicator, is smarter and more stable.
It features two light groups: normal 6 modes and ramping, which makes it a useful tool for different purposes.It delivers maximum 1300 lumens, reaching distance up to 153 meters/ 167 yards. Side switch controls all functions, such as turn on/off, battery indicator, cycle modes group setting. It enables SP32A 2.0 more stable and one-hand friendly.
Use CREE XP-L2 LED with a lifespan of 50,000 hours.
Working Voltage: 2.8-6.6Volt
Battery Supported: single premium 18650 protected battery or two CR123A Batteries
Dimension: 123mm(length)× 23.4mm(head)
Net Weight: 65±1 gram (no batteries included)
Made by Aircraft 6061 grade-aluminum alloy, Premium type Ⅲ hard-anodized anti-abrasive finish to get solid built body, anti-crash.
Toughened glass lens with AR coating
The waterproof level IPX8: 2 meters underwater.
Reverse polarity protection, to protect from improper battery installation
Mode Memory : It memorizes the last brightness level used in the general modes, but it does not remember the Strobe mode. It will activate the last brightness you selected , when you turn on the flashlight next time.
Advanced temperature regulation (ATR) technology：
It adjusts the brightness level automatically when the driver temperature reaches 60℃ to keep the light from overheat.
Automatic Stepdown: Turbo steps down to High after working for 3 minutes to avoid overheat.
Power Indicator: The LED indicator on side switch blinks in Green for 5 seconds means battery has enough juice. The indicator turns to Red means battery is short of power. If the indicator is flashing rapidly in Red, please recharge the battery.
The side switch controls all functions
Group 1: 6 modes (default group )
LL 5lm--Low 50lm--Mid 130lm --High 500lm --Turbo 1300lm --Strobe 1300lm
click to turn on; press & hold for 0.5 second to turn off
It cycles from Eco to High
Double clicks to activate Turbo, one click to return last mode
triple clicks to activate Strobe, one click to return last mode
From Group 1 to Group 2: hold& press the switch for 3 second from any, 2 blinks to confirm
Group 2: Ramping (From 5lm to 1300lm)
When the light is in group 1, press&hold switch for 3 seconds, it switches to Ramping, the default brightness is 160 lumen (Medium Mode).
When the light is in Group 2, Fast click to turn on or turn off
Press&hold the side switch to ramp up and down. It changes direction when ramping again within 1.5 sec; same direction when ramping again after 1.5 sec.
The light flashes one time when it reaches Eco or High.
Double clicks to activate Turbo, one click goes back to the last brightness.
Triple clicks to Strobe, one click goes back to the last brightness.
When the light is OFF, press&hold for 3 seconds, it flashes 2 times and then switches to Group 1.
When at the Eco or High, the light flashes 1 time; no pause and keep press&hold for 3 seconds switch to Group 1, 2 blinks confirm switch success.