Type:Wireless;Compatible Brand:Canon;Compatible Brand:Olympus;Compatible Brand:Pentax;Compatible Brand:NIKON;Brand Name:SUPON;Package:Yes;Model Number: PT-04 NE;
Wireless Radio Flash Trigger PT-04 NE 4 Channels Remote Trigger With Hot Shoe Umbrella Holder Receiver for CANON NIKON PENTAX
The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous
trigger studio flash of cameras.
It consists of a signal sender and a receiver trigger and works by means of the frequency
modulation wireless remote control.
The signal transmitter adopts the advanced circuit and components, and can transmit
the coded FM wireless signa.
The circuit of the transmitter has the function of standby and hibernation, hus it has low power
consumption; the products can work under the standby mode for more than one year with
only one battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA,
which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable
to the traditional or digital camera with hot shoe or PC controlling interface.
Receiver trigger adopts dry battery for power supply, which is safe, energysaving, and convenient.
The product adopts micro-computer for controlling the decoding, Which has superior anti-interference
capability; sensitive reaction speed, the highest synchronous speed can reach 1/250 sec.
All the models of the product uniquely have the multifrequency isolation technique and the selfcoding
matching function by users. Users can freely match and use the sender and the receiver according
to the demands, which have 16 isolated channels to suit for specific shooting environments.
Triggers set in different channels can be combined to work or independently work but do not
interfere with each other in an efficient distance.
- Channel: 4 Control Channels
- Frequency: 433MHZ
- Control Rage: Up to 20 meters (open area without interference)
- Shutter Sync Speed: Up to 1/250th second
- Transmitter Battery: 23A 12V small battery (included)
- Receiver Battery: 2 x AAA battery (not included)
- Operating temperature: 5 ??C to 40 ??C (40 ??F to 105 ??F)
- Trigger times: 30,000
- Trigger current: 0.01mA
- Transmitter standby time: >over 1 year c
How to use:
1 Make sure the channel selector of both transmitter and receiver at same
2 Insert your flash hot shoe socket into the receiver's hot shoe jack
3 Press the test button on your transmitter. The Flash should now flash
4 Insert the transmitter's hot shoe socket into your camera's hot shoe jack
5 (if your camera does not have a hot shoe use a PC
sync cord and insert into the socket)
6 You should now be ready to start shooting
Compatible with following flash units:
- Canon: 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX, 430EX II, 430EZ, 420EX, 420EZ, 380EX...
- Nikon: SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24
- Pentax: AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT
- Olympus: FL-50, FL-40, FL-36
- Vivitar: 285HV (Older Vivitar 285/283 works only with PC sync)
- Jessop: 360AFDC
- Metz: 50AF-1
1*PT-04 NE Trigger
NOTE: The trigger set isn't compatible with Nissin flash units (except Nissin Nikon fit with firmware upgraded). Also, Please make sure you turn off your flash unit before it's mounted onto this trigger set.